how can i remove this speed sensor u couldn’t find a way to unscrew it ( bosh e bike ) so i can run faster than 25km
Posted by Several-Try1754@reddit | ebikes | View on Reddit | 16 comments
Tight_Intention9306@reddit
Im delivering on an xtraclcle i don't want to jump or go dangerously fast but..can you tell me how to get it to go faster than 25
poydunk@reddit
If you have a magnet for sensor you dont need to change anythin about sensor. Just change the magnets position and add neocadmium magnet inside to pedal
PriceAcrobatic@reddit
Hi, you mentioned you just need to change the position of the magnet and attach a neodymium magnet to the pedal. So you don’t have to move the sensor? I’ve always thought that people mount the sensor on the outside. I got this e-bike from a friend, and I don’t know what he did to it. It used to go about 45 km/h. Now, all of a sudden, it doesn’t anymore. It suddenly started showing error 503. The magnet was running about 3 cm away from the sensor. Now I’ve attached it at the same height, and it only goes 25 km/h. Can you help me out?
aj34df@reddit
What others said, removing sensor is a great way to stop your motor helping you :)
You need a speed chip to unlock 25+ (easy way) or flash a 45+ firmware (hard way) to do this
Several-Try1754@reddit (OP)
actually i did it by reloving the sensor wich was the hardest part for me, then adding magnest the bike is good now
Relative-Display-676@reddit
there is a screw under a cap in the back of the round portion of the sensor. remove the screw and you can remove the sensor.
Several-Try1754@reddit (OP)
thank you bro, your comment helped me do the Hack hahaha !
SpiritedReporter4647@reddit
In my bike removing speed sensor doesn’t do anything except not give any power from the motor. It has to be tricked in some other way. I bought a chip for my bike so it’s basically unlimited. I like to use it for jumps and it’s more dangerous with the limiter on because you can’t get any speed after 25kmh and most of the jumps require way more speed. Just for the streets it wouldn’t be worth it. You are not going that much more faster and you can get a hefty ticket for it.
Active_Ad_5322@reddit
Removing the sensor does not do anything except completely disabling the motor.
What a great take on the phrase “doesn’t do anything “
Imagine buying a bike for a purpose that it was not designed to do.
Ya know, most people would just buy an emoto for jumps that were originally designed for motorbikes.
But hey, great feedback.
SpiritedReporter4647@reddit
These look like a motorbike jumps you dumb fuck
Active_Ad_5322@reddit
Hey, good thing you showed a pic to illustrate that it was never intended for a 25kmh ebike. Next time get a regular bike and learn how to pedal fast, you fat fuck.
unseenmover@reddit
removing it signals/triggers a tampering error and bricks the motor..
Active_Ad_5322@reddit
Add a second magnet for twice the speed.
zachleedogg@reddit
Ebiketuner dot com
Odd-Lime-2738@reddit
As long as you’re not damaging the stay, you can go right ahead with a set of vice grips and rip that sucker off.
Rogue_Wraith@reddit
https://www.bosch-ebike.com/us/service/ebike-tuning