What's the difference between cheap vs expensive graphics card, and is it worth paying extra for the same series?
Posted by KurangEnak_PalaluPea@reddit | buildapc | View on Reddit | 102 comments
For example, GPU brands like Gainward, Palit, Inno3D, is relatively cheaper than its expensive counterparts like Asus ROG, MSi, or Gigabyte.
Is it worth paying extra money, especially if I don't know shit about undervolt, overclocking, etc.
AdstaOCE@reddit
The differences are mainly in cooling, eg a bigger overbuilt card might run cooler. The other difference is in support, especially in countries where you send back to the manufacturer instead of a retailer (sending it back to MSI/Gigabyte etc instead of amazon/newegg etc).
Soulsupernova1@reddit
Unfortunately gigabyte is one of those big name company’s that doesn’t like honoring warranties unless you fight them on it
Sopcio@reddit
I disagree, unless I am one of the few that didn’t have any trouble.
While gaming, yy 5080 Gaming OC produced a vibration which went from wtf is that to annihilation nearly instantly and spat a blade off the middle fan then shorted out a wire from the fan set. (Random AF I know)
I sent it in for RMA and three weeks later it was returned fixed. I had previously taken the gimmicky slide panel off it as well as I wasn’t sure if I liked it or not and wanted to try it for a while removed.
They even replaced that…
Soulsupernova1@reddit
Back in 2018 when I had to rma my 1080ti for a bad vrm since my card would black screen shut off every time the gpu went under load. I had to rma it twice and both times I had to pay $80 shipping on top of the supplied slip gigabyte sent. First time they said nothing was found wrong with the card I get it back 2 months later, and lo and behold it’s still doing it. Send it again and the techs said in an email “we found a bad vrm on the card and replaced it your card will be returned within the week”. Cue another 2 month wait and finally the card works as it should. They also rejected an rma on my x470 board that the blue channel for the rgb failed across the entire board. Said it was likely user induced damage.
Sopcio@reddit
That’s no good, maybe their customer service got better over time. Your experience would be enough for me to change companies TBH.
deleted_by_reddit@reddit
[removed]
AutoModerator@reddit
Hi there! Thanks for the comment.
We ask that posts and comments be in English so they can be understood by as many people as possible. Translations on Reddit are client-side, and not all apps or browsers support auto-translate. Currently many users (and moderators) aren’t able to read your comment.
Could you please submit a new comment in English?
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
Errettfitchett03@reddit
There has been testing done, and sometimes with the cheaper cards you get better silicon because the card needs to perform better to be validated with a cheaper cooler.
PigSlam@reddit
When you say "same series" do you mean an RTX 5070 from different manufacturers, or do you mean the difference between an RTX 5050 and an RTX 5090?
KurangEnak_PalaluPea@reddit (OP)
RTX 5070 from different manufacturers. The difference between 5050 and 5090 seems a bit obvious, isn't it?
PigSlam@reddit
Both are obvious to me, it wasn’t obvious to me which part wasn’t obvious to you.
KurangEnak_PalaluPea@reddit (OP)
Well, I'm just not sure the difference between let's say... A cheap 5070Ti or an expensive 5070Ti, if that helps. I'm new to PC building stuffs so yeah, hopefully I'm explaining it correctly.
PigSlam@reddit
I think it's been covered pretty well by this point. The chip is generally identical, or maybe slightly better or worse because a batch of chips will have slight variations throughout the run. One manufacturer might overclock a bit, use a better cooler, more stable supporting chips, like VRAM, etc., but by and large, you'll get 95% of the same performance from any card of the same model from any manufacturer, but you might pay more for RGB, a bigger heat sink, smaller package, more fans, quieter fans, some Anime girl decal on the shroud, etc.
KurangEnak_PalaluPea@reddit (OP)
Yeah, and for prestige I suppose. Buying a ROG Astral is gonna make you feel way more superior than its cheaper counterparts.
But idk, a 5080 is a 5080. And mine doesn't look so bad anyways. I don't really care about RGBs honestly.
PigSlam@reddit
For some, I suppose that might be true, though I can't say that I've ever even considered thinking about which GPU anyone else bought, or how that would change my opinion of them. I doubt any have done so with my GPU purchases.
miroljubni-rom@reddit
not worth it
No_Device_6605@reddit
Get the cheapest .
Familiar-Banana-8116@reddit
I mean, you can. But holyshitno. Read the thread, build quality, warranty service, noise are all legitimate concerns.
If you are gonna pay $800+ for something you might as well pay a bit more for the peace of mind it is exactly what you want.
Middle-Effort7495@reddit
Warranty is down to the company, not if you bought their most expensive or cheapest version of the same card. Noise is like 99% what limit you set it to in msi afterburner. Any GPU can run completely quiet.
xisytenin@reddit
I just bought one of the more expensive variants of the 9070xt... purely because I like how it looks. Don't get me wrong, I appreciate the build quality/cooling etc... but I bought it specifically because it looks cool in my case. Dumb reason? Absolutely. Any regrets? Nah, I work long hours at a job that I hate, sometimes I buy myself nice things.
Familiar-Banana-8116@reddit
I said:
And that is exactly what you did.
And don't lose sight what I wrote was replying to this comment:
That for some fucked up reason hasn't been voted down to negative numbers. That it is sitting at 7 is just.... typical.
Congrats, you just spent nearly $800 and you got the cheapest. Don Depardo, tell him what he won!
xisytenin@reddit
My point was I didn't need a very good reason to just go for the one that I really wanted. That being said, this is the first time EVER that I didn't just get whatever was cheapest for the gpu that I wanted and I can't honestly say I ever had a bad experience doing so.
Huge-Attitude9892@reddit
Tbh all of them mentioned are not worth the extra cost except the warranty service in some countries. I play with headsets so noise doesn't matters(I had multiple blower cards as well so i know what i'm talking about).
And lets say if you are in europe and buy a card from a european store then the warranty is basically settled.
I had multiple cards dyin on me. Mostly AMD,but i always got a replacement or got my money back.
No_Device_6605@reddit
If it's like 850, then sure.
Justhe3guy@reddit
There’s good reason why some of the brands are so little known and never suggested
Zynera@reddit
make sure its actually the same. just because its a 5060 doesnt mean they have the same amount of vram which is what matters. if one is way cheaper it probably has half the vram. I’d look for a break point where the vram goes up if you are going to play modern titles like that new indiana jones game or the last of us or atmospheric games like that. if you just want a league of legends machine or really any common esport title (ow, rocket league, dota, cs2, etc.) the graphics arent heavy and you can get good fps with less vram no problem.
Huge-Attitude9892@reddit
Thats the 5060ti. All non Ti 5060's have 8GB of VRAM
Zynera@reddit
my bad. point stands there are niche scenarios you have to look out for like the 5060ti.
Huge-Attitude9892@reddit
Nah. Maybe back in last October/November,but not now. There are really noticeable price difference between 8/16GB cards (9060XT/5060Ti).
Depends on the region,but this number can go from 75$ to 250$.
conor_is_my_name@reddit
its the same chip, but the cooling might be better in the more expensive variants.
I typically don't think its worth the price premium
AloneMan512@reddit
Cheaper cards has worse parts too like lower quality vrm’s, inductors and capacitors. It’s less stable and more chance of issues. longevity is better on more expensive gpu’s.
karmapopsicle@reddit
Those commodity components are generally very reliable, and nearly all cheaper cards are built directly to the reference spec provided by AMD/Intel/Nvidia. Running the cards within their specified power windows you're unlikely to see any kind of difference in stability or longevity between them.
The differences start to matter when we're talking about exceeding those design specs, which is where custom PCB designs from the various AIBs come into play. Certainly it's not impossible to imagine a heavily overbuilt card aimed at overclockers could potentially outlast a basic reference spec card over a very long time period, but a resistor or capacitor could go bad on either and take the card out of commission and those expensive VRMs aren't changing anything there.
gokufire@reddit
Noise level on certain cooling parts can be sometimes annoying. There is also coil whine present in some implementations methods.
bromoloptaleina@reddit
Yeah I bought the most expensive 9070xt available and still got coil whine. It’s essentially lottery.
Aadarm@reddit
Mine was close to the most expensive and still ended up with coil whine, most of the time I can ignore it due to wearing a headset, but it does annoy me to no end when I have to listen to it.
psimwork@reddit
It is 100% lottery. Coil whine comes from components that are the same components used on basically every single graphics card out there. There's no grading of these components - they're simple commodities. As such, there's no way to ensure that the more expensive components get a higher grade of components, so if you get one that has coil whine on it, it is just luck-of-the-draw.
AIgoonermaxxing@reddit
I will say that almost every problem that comes from buying a cheap card (temperatures, fan noise, coil whine) can be greatly mitigated by undervolting it at no performance cost. Obviously it's not a guarantee with the silicon lottery, and you can also do the same on the higher end cards too and reduce their temps and noise, but they're already going to be running pretty quiet so it's not going to be as big of an improvement comparatively to doing that on a cheap card.
If you can get a quieter card for like $10-20 more then I'd say absolutely go for it, but if the price difference is bordering on going up an entire tier of card then it's not worth it IMO.
Huge-Attitude9892@reddit
My thing is "I could buy the 9060xt 8GB HellHound Or the Asrock Challenger 16GB for almost the same price". And thats why i didn't had an expensive variant of a graphics card
Salisen@reddit
One thing I don't think has come up yet is that the differences in size between brand can be non-trivial. Depending on your case, your motherboard, and what other PCIe cards you might want to use, the length and number of slots can matter.
ankit_saiyan@reddit
Better cooling (Dual/triple), better heat sink, better lools and RGB. IMO it's not worth it unless you really need better cooling. As long as thw card has good warranty in your area then you should be fine.
Beautiful_Jeweler_83@reddit
Better cooling
Better Overclocking
Accept if price difference is 5-8%
KurangEnak_PalaluPea@reddit (OP)
Oh I don't really do overclocking anyways, so I guess I'd just get the cheapest one
Orallover1960@reddit
You don't quite understand. The more expensive cards are already overclocked from the factory. So if you aren't a person who can do the overclocking yourself you can buy that card and get a little more performance.
MagicPistol@reddit
I usually just go for the cheapest model/best deal for the gpu I want, unless it's well known that it has issues. Been building pcs for over 20 years and haven't had any issues yet. Well, I did have a geforce 9800 gt that died after a few years, but that could happen with anything.
Wise-Log-2897@reddit
For 5060, 5060 ti and 5070 you can get the cheaper ones, they won't heat up that bad anyway. Underclocking is as simple as watching a yt tutorial and doing it. I did it first try like I saw on yt and it's the same ever since.
Powerful-Ad2869@reddit
“You get what you pay for”
There’s a reason why some cards are expensive and there is also a very obvious reason why on some cards are way cheaper even though its the same chip with the same performance
Its not necessary to purchase the most premium/highest priced ones BUT I WOULDN’T EVER GET THE cheapest ones either. Why? I should know, my neighbour repairs GPU for a living
And people like to downvote this type of comment so go ahead
bblzd_2@reddit
Each manufacturer makes budget, mid range and high end versions of every GPU model. Example Asus Strix 5070 is a higher end model and Asus Dual 5070 is a lower end one.
So what matters is the individual models, not the brands.
Main difference is coolijg and therefor noise. If you value lower temperatures and lower noise while gaming you need to pay extra.
But there can be many other cost cutting measures. Everything from the quality and layers of the PCB, quality and amount of electrical components, size and weight, etc. which can lead to differences in clock speeds, power levels, potential life span of the card, etc.
uxixu@reddit
Low to mid range, probably no difference other than aesthetics. High end? Better mosfets and cooling and small touches like per pin monitoring, (Asus Astral), slightly better on the bin lottery to meet the OC specs, but even then still conservative on the voltage-frequency maps, etc
coolgaara@reddit
I have never ever heard of the 3 cheaper brands you listed. Are they outside US or something?
KurangEnak_PalaluPea@reddit (OP)
I think so. I live in southeast asia, and there are some GPU that aren't exactly on the US markets. Probably chinese brands, so they couldn't get to the USA.
jhaluska@reddit
Usually they have bigger coolers that let them bump the frequency/voltage up a bit and potentially hit slightly higher frame rates. The performance often isn't dramatically different, but they can run quieter and cooler which can help longevity.
alvaro-elite@reddit
The biggest difference between brands lies in the components.
The chips are the same in all of them, but the PCBs or memory chips can vary.
Besides all this, some brands invest more in better heatsinks or better fans that allow the graphics card to perform a bit better. It's not usually a really noticeable difference, but a 10°C difference can be quite noticeable if you're pushing it to the limit (this rarely translates to a difference of more than 5% between one model and another).
The best brand of all in terms of chassis and component quality is EVGA by a wide margin. For example, they use copper heatsinks instead of aluminum and better fans with very good bearings; they're built to last. But they stopped manufacturing graphics cards because they had a very small profit margin, and with the rising cost of memory, they can no longer compete in the market without losing money.
It doesn't really matter which brand a graphics card uses. The same model from 5 different brands will offer you the same thing, but some will last longer or give you fewer problems than others.
Abdullah7862@reddit
If you’re just gaming and not into tweaking, cheaper brands like Palit or Inno3D are totally fine—same core performance. You mainly pay extra for better cooling, quieter fans, and looks with brands like ASUS ROG or MSI. Not sure about your CPU + GPU combo? Check it on any bottleneck calculator website.
EntropySimian@reddit
The primary difference between cheap cards and expensive cards is power management. If you're buying anything other than the highest end cards, it probably won't matter much, unless they are known for using sub-par electronics.
I see a lot of comments on cooling solutions, these can play a part, but most cooling solutions are fairly similar on anything but the top cards as well.
Higher end cards, however, aren't as power resilient due to pushing closer to the limits and need cleaner power control. The 3090 is a really good example of cheap components causing instability and ruining cards. Here's a fairly decent write up about it:
https://www.igorslab.de/en/nvidia-geforce-rtx-3080-und-rtx-3090-and-the-crash-why-the-capacitors-are-so-important-and-what-are-the-object-behind/
skyfishgoo@reddit
generally not.
look for the best performance per $ at the time you are shopping and go with the one in your price range.
i would avoid no name, cat walking on a keyboard, names tho.
makoblade@reddit
A 5070 is a 5070 regardless of which manufacturer is selling it. Power delivery and cooling setup differ between brands, but it's not a significant difference in performance. There's basically no instance where buying a specific brand grants you appreciably more performance than another.
That said, some cards run cooler or quieter than others, so if those factors or aesthetics are important enough that you consider paying more then go for it.
WizardMoose@reddit
Years ago I'd say it was worth paying the premium for EVGA just because their warranty system was a breeze to use if needed. Even better when BFG was around.
But now that they're both gone, it doesn't really matter. They all have mediocre warranty claims systems.
tanz700@reddit
I bought a PNY 4080 Super because it was the closest I could find to msrp pricing. They have their own custom cooler like every other brand and came with a slight factory overclock. The expensive brands might have a slightly more effective cooler and higher factory overclock, but the performance difference is trivial considering they can cost several hundred dollars more. You are also paying a premium for pure branding. I would definately consider cheaper brands especially since you don't plan to tweak the card (i.e. change voltages and push it to the limit).
Variandra@reddit
I am not an expert but have built a fair share of PCs. The main difference is warranty and support if an issue does come up.
Some manufacturers also do extra testing for over clocking and stability purposes and if u plan on tweeking anything on the card make sure to go with a more main brand. EVGA no longer does gpus but that was my go to because they had such good support and warranty.
The only other thing is cooling and fans. Nvidea sends a chip and manufacturers add their own fans and cooling systems so bigger brands have better, quieter, longer lasting fans and motors. Some add LEDs or mini screens and that's all on the brand.
There may be more to it from a technical stand point but I am not 100% sure if they are allowed to change anything on the chip itself.
asreagy@reddit
No. Silicon lottery is more important.
bombastic6339locks@reddit
I think they might run a tiny bit cooler so if you're planning on going for some crazy overclocked mega ai build or something then it could be important but usually i just pick the cheapest / what fits my case.
Diptothaset@reddit
It really depends. Some companies might use a similarly powerful chip but cheaper components to get a lower price. Some might opt to buy the highest binned/performing chips and the best components but it costs significantly more because the most competitive people are willing to pay that difference for relatively minor improvements
Not all chips are made equal. My 9600k can only be pushed to 4.8ghz but many of them can reach 5.2ghz. It’s referred to as the “silicon lottery”, even within a specific chips manufacturing process you get quite a lot of variance. The manufactured chips are “binned” which is a measure of performance and can be used to tier the chips. Want to make 5080 for the frugal market? Buy lower binned chips for cheaper than top performing chips. They still perform within the specs of a 5080 but they just can’t hit the same boost clock rates and don’t perform quite as well.
Chris00008@reddit
These big names like Asus, MSI, and Gigabyte were also wtf names in the 90s.
Does anyone remember building their first computer and was like, "lol Gigabyte"?
dorting@reddit
Better temps less noise
majestic_ubertrout@reddit
There was a time when cards more or less stuck around MSRP but you could get the more expensive variants on sale at close to the same price as the cheap ones. That felt like the sweet spot - especially if you're running the card for long periods.
lejoop@reddit
I currently own an Inno3D 5070 ti. It runs very well, cool. Very happy with it. My previous card was a Asus Tuf 3090, and that e batard was pretty loud, so I wouldn’t say that you should expect better acoustics just from buying at premium
KurangEnak_PalaluPea@reddit (OP)
Sorry for asking, but why not keep the 3090 until like, 2030 or something? I'm pretty sure your 3090 can run any games without any problem whatsoever.
lejoop@reddit
Honestly you are right, was probably almost a side-grade, but I wanted something smaller and cooler, and it did give a small performance boost overall. I did re-paste the 3090 recently, so I should test that one of these days. Then I can also test of it was actually worth it 😂
Muspelheim_Moors@reddit
for the 9060xt 16gb there can be a big difference in that the cheaper models dont have thermal pads on the vram chips on the back of the board. it probably doesnt effect performance massively right now but it probably doesnt help for the longevity of the card & also it means they're not fully utilising the metal backplate for heat dissipation. this was one of the reasons I opted for the Sapphire Nitro+ model as it has thermal pads on every single vram chip, also I hate excess noise & heat so chose a cooler and quieter model plus there wasnt any reports of coil whine with this card/model & that was very important to me
cakemates@reddit
its like when you go to a dealer trying to buy a car, they have the base version for 40k and the ranchero version for 70k, both have the same engine. Its just like that the fancy version might have nicer seats, better suspension but at the end of the day they perform almost the same with the same engine.
mrmoerkel@reddit
If you buy a highend card, might as well pay a little more for better cooling. The second you are in midrange or budget territory the expensive model doesn't make sense because you could get more performance for the same price.
autobulb@reddit
Ultimately whether a graphics card is worth it or not will require you to read/watch in depth reviews of that specific model to see how it performs and how it compares in pricing to other models.
But in general, cheaper models tend to have cheaper cooling solutions and rely on faster spinning fans to keep the components cool which means more noise under load.
More expensive models can provide some under the hood improvements that may be hard to see or might be questionable if it's worth the price increase. Things like increased cooling/less noise (very worth it for me,) more stable power supply components and cooling for those components, better cooling for components that are often neglected like the memory chips. Stock overclocks are probably one of those most expensive "addons" that manufacturers add but are rarely worth it and can sometimes achieved by yourself if you just get a card with good cooling.
But like I said in my first sentence, it all depends on the model and how well the maker has implemented their changes. Some cards are cheap, decently put together and cooled, and so represent good value. Some cards rely on name brand recognition, flashy aesthetics, and marginal stock overclocks to make it look like a "premium" card that actually performs similarly to others making it poor value.
Some are just poorly made and still not worth a lower price, or egregious with their higher pricing. These should just be avoided entirely.
There is no way to know which is good and which is bad without well done thourough reviews of the product. People who say "this brand is good" and "this brand is bad" are relying on anecdotes and often their own experience, which is a very small sample size and not trustworthy. Just like how everyone online seemingly says to avoid Asrock motherboards yet they are the only maker I have been buying for many years now and have provided excellent stability and value for me. Why? Because I went by reviews for specific models that I was interested in.
Never go by generalizations. Check the reviews.
parcelsnotletters@reddit
I always do a little homework eg... the xfx swift gaming oc version of the 9060xt has great cooling for a budget price card, but the the powercolor reaper version is tiny in comparison and may be better for a small form factor case.
trouttwade@reddit
Like everyone says, cooling. I bought the 5070Ti Aero opposed to the Eagle edition for this reason. Basically has the same cooling as a 5080, and it feels worth to me because I had the extra $100 laying around.
Under max load the gpu doesn’t go over 55°C. Realistically speaking though, the difference isn’t huge. You might get a 1% performance difference out of that. If you’re tight on money, get the cheapest option.
Every_Recording_4807@reddit
Noise and form factor
No_Cardiologist735@reddit
Some have better cooling and run quieter. The 5080 and 5090 Astral also have sense pins that can earn you, if there's too much power on one of the pins to reduce the risk of melting. Otherwise, there's no big difference.
Illustrious_Law182@reddit
Tbh never had issue with a loud GPU, it’s almost always CPU related. Modern GPUs have crazy cooling, even when buying these budget versions.
ScottyStellar@reddit
Cheap is ok just make sure it has a decent fan. Most GPU replacements are for broken fan/cooling, not the actual GPU
ButterscotchTop194@reddit
Noise levels.
Ladyheather16@reddit
Both JaysTwoCents & GamersNexus on YouTube have videos on this subject & it's all in what you want it to do.
It's very easy to over spend on certain parts and very important not to under spend in other (like your power supply)
It's all in what you want to do, if you're going to be gaming to doing any 3D rendering, running any LLM. Etc.
grump66@reddit
If the cheapest one has equal manufacturers warranty coverage, get that one. Manufacturers warranty is worth something. Some of the cheapest used to have only 1 year warranty, compared to 3 years being common for better brands. There were also some manufacturers with more than 3 years, but I don't know if anyone offers that any more.
NavySeal2k@reddit
What’s the difference between a 70 bucks jeans and a 120 bucks one? Sure you have a bit better build quality but 95% won’t see the difference. Rest is marketing and brand name
This_Suit8791@reddit
Not always, some of the higher tier sku’s have a better overclocking chip compared to the budget variant. I would stick recommend going for the cheapest or the one you like the look of first though.
NavySeal2k@reddit
What is an overclocking chip?
toothwoes123@reddit
basically he's saying that the chips have been binned, a.k.a sorting according to quality (eg. tested and able to have a higher stable overclock etc).
so for the same series of GPU chips these brands would usually use the lower quality chips for the budget cooler variant (eg. single fan, smaller heatsink), and higher quality chips for the premium cooler variant (eg. triple fan, larger heatsink).
This_Suit8791@reddit
The graphics chip is better at overclocking
SAHD292929@reddit
Usually for the higher end models they use the better binned chips so you can theoretically get extra performance. It is still not worth it though than going up a tier, for example a higher end 5070 wouldn't still be better than a low end 5070ti. And sometimes the price overlaps
kester76a@reddit
OP, always check GPU Database | TechPowerUp
The main differences are RMA practices between brands. Between card tiers you looking at power limits, cooling, factory GPU/RAM overclocks. I like Palit and Gainward as they're the cheapest bang for buck. Don't buy ASUS as their RMA track record is hideous.
aCuria@reddit
Some GPUs are duds, run hot, loud fan, coil whine
Sometimes it’s the expensive models that are problematic
Some gpus follow nvidia’s specs exactly. Palit tends to do this
Some gpus try to cut costs. Use cheaper or less components and pass the savings on. Zotac was known to do this,
Some brands overbuild the card. Use 4090 board design for lower end card. Asus and gigabyte tends to do this.
You can dig up the old articles on the MLCCs vs POSCAP/SP-CAPs failure on the 3090 series cards, they talked about how some brands skimped on the filtering
virgotop@reddit
The temperature difference is minimal. But for people who will fully utilize and run it almost 24 hour a day would spend more for better thermal cooling. For normal use other than aesthetic and favoritism u could just go for the cheapest. Also warranty claim might be better experience for high-end brand
Melodic_Trash_737@reddit
Aren't some of the components that are attached to the motherboard upgraded to better types on some of the more expensive cards?
kind_bros_hate_nazis@reddit
Nothing that really matters. They operate just as fine but usually a bit louder
Rossmci90@reddit
Aesthetics is a big part of the reason for some of the price differences and this matters a lot to some people.
I personally can't even see my pc much so i'm not bothered about the looks but I understand why it is important in some builds.
kind_bros_hate_nazis@reddit
The only rgb I have is white EVGA on the side of my card. I feel like that's more than enough
Patapon80@reddit
Let's say you're looking at a 5080... some variants will have different specs as some are OC'd a bit more than others. Generally speaking, this difference doesn't really affect performance enough to justify any price difference. In this regard, get the cheapest item.
On the other hand, when looking at brands, I would look at their support or build reputation. Sometimes, a brand would have known overheating or build quality issues, or have poor support/RMA systems. I would suggest to pick one after doing some research in this area. RIP EVGA. :(
Finally, I would look at the cooling system, ie 2 fan vs 3 fan, heatsink size, passthrough or not, etc. I prefer a 3 fan system and don't mind paying a bit extra for this.
ucwepn@reddit
Palit gamer 5070ti is an overkill cooled beast.
definitlyitsbutter@reddit
In general the Difference is a factory overclock and a bigger/better (but often not necessary) cooler and asthetics.
WanderingGenesis@reddit
Main differences are the cooler, the aesthetics, and in some cases, some manufacturers will have their bar clock speeds higher than others. For example the xfx 7900xt swft is clocked slightly higher than the base clock settings you typically see for the chip.
That said, but what you can afford and what you think looks cool. Clock speeds can always be adjusted with software, and even aesthetics can be adjusted later.
Ok-Mango9434@reddit
I like my computer to sound like a jet engine personally, and have a nice pair of headphones if I don’t want to hear it, cheaper generally means louder if it’s the exact same card otherwise, if the look of the card matters a lot to you then it’s a fine thing to base your decision on
theRealtechnofuzz@reddit
depends on what you want. cheaper cards are fine at 1080p, specifically a rx 9060xt or a used 3070/3070ti. Bu you'll need a half decent CPU to push a faster card. If you're at 1440p it will help if you want higher framerate. It all depends on your monitor, settings and expectations...
skylinestar1986@reddit
Better cooler. This translates to quieter pc.
misteryk@reddit
If it's the same card just get cheapest one unless theres some specific features you're looking for or one has easier time with warranty in your country etc.