Ouxi V8 e bike help please

Posted by Nearby_Media3393@reddit | ebikes | View on Reddit | 8 comments

I had bought an OUXI V8 e bike And was wondering if there’s a way you could jailbreak it or cutter wire to make it look fat or make it go better and faster I know there’s like a display setting that you could like make it seem like it’s going fast but it’s just a display that’s changing the speed or I don’t know because I tried that with my scooter like changing the display and making it go fast but people just said it’s just like the display setting speed. It’s not really going like the speed you want to be Like for example let’s just say I put the speed to 50 on my scooter but it’s not really going 50 it just says it’s going 50.

[-]

chuckwolf@reddit

It's in the display settings, set P08 to 100 for kph, or 62 if you have the speedometer set to mph. That will let it go as fast as your voltage allows

Nearby_Media3393@reddit (OP)

So I would go 62 mph

No, the bike would still be limited by the voltage of your battery and the wattage of the motor(s) for example a 48 volt system with 3000 watts tops out at 35 mph, and a 60 volt system with 4000 watts does 40 mph, less wattage means slight less speed because of wind resistance

OK, I saw on TikTok where if you put 8 to 52 a like breaks it to 31 miles so now that I have that ChatGPT says you can’t even go any higher

Your top speed with a single 1500 watt peak, 1000 watt continuous motor at 48 volts should be about 32 mph full throttle in PAS 5

Ok but mine is also the dual motor 4.0

Then you can expect 35 mph if the battery is fully charged to 54 volts, and 30 mph at 48 volts

MarsRT@reddit

It’s probably going at its max speed