Nope, you're right. Something is missing back there. I haven't taken a lick cylinder apart in a while. Hahaha
You can verify with an ohm-meter. Out the lock cylinder in place and turn it. If it doesn't close the various contacts as you turn the cylinder, then you're definitely missing the contactor
Protodad@reddit (OP)
Not the lock cylinder…I have that. Shouldn’t there be a part inside the ignition switch that engages the contacts in the back?
Squire_Soup_Sandwich@reddit
I thought the lock cylinder had the contacts in the back
Protodad@reddit (OP)
This is the back with the lock cylinder in place. The piece with the contacts sits in that lip at the top edge. They are at least 1/2” apart.
Squire_Soup_Sandwich@reddit
Nope, you're right. Something is missing back there. I haven't taken a lick cylinder apart in a while. Hahaha
You can verify with an ohm-meter. Out the lock cylinder in place and turn it. If it doesn't close the various contacts as you turn the cylinder, then you're definitely missing the contactor