[ACC] Mcfadden Ultimate Cliploader for 22 pistols (Ruger MK, Buckmark, etc), $9.99 + ship with code WELCOMETK10 and new acct, no tax to FL

[-]

Hereforgundeals69420@reddit (OP)

Code WELCOMETK10 took $10 off my order, was $16.45 shipped to FL with no tax collected. First order there, spectacular and existing account or email used previously may not work.

[-]

DanGTG@reddit

The code does not work. "Your order does not meet the minimum total for this coupon code to be applied. Please spend another $80.01 first.OK"

[-]

Welp... you got us 😅 Due to a technical error, our newsletter promo of $10 off orders of $100 or more temporarily became $10 of $10 or more (oops). Any existing orders will be honored, but the promo has since been fixed.

TLDR: We done messed up, but our loss was your gain... this time 😏

Thanks for shopping with us, we appreciate y'all!

[-]

Hereforgundeals69420@reddit (OP)

Sorry guys, hope I didn't get anyone in trouble. I'll be sure to check out you guys first when it's time for MKIV upgrades haha

[-]

Emma_Tandemkross@reddit

Absolutely not your fault, but we appreciate you saying so!

[-]

Taco-Rice@reddit

code isnt working for me and suggested i haven't hit the $100 minimum for an order for it to work. Made an account too. Any thoughts?

[-]

paper-money_and_gats@reddit

tandemkross commented 2 hrs ago and said they made a mistake. $100 minimum is correct.

[-]

Taco-Rice@reddit

edit: I see the tandemkross post; makes me sad

[-]

DocHolliday3884@reddit

They changed the terms of the coupon overnight.

[-]

paper-money_and_gats@reddit

yep, now you have to spend $100

[-]

generic__user@reddit

so im a huge fan of my speed bee loader https://www.speedbeez.com/product/ruger-mark-4-22-ultimate-clip-loader/ i just dump in my 22 and then a few drops of Lucas gun lube and it works perfectly i can load my ruger mags in like 2 -3 seconds. But it does need a few drops of lube as 22 is sticky / waxy

[-]

Minimum_Government@reddit

Absolute must. Removed any annoyance in shooting 22.

[-]

AfternoonSuitable876@reddit

Not compatible with the Tx22.

Pain.

[-]

Minimum_Government@reddit

Yup, no problems ordering direct.

[-]

clicktoseemyfetishes@reddit

Weird that their Ruger 10/22 adapter specifically doesn’t work with actual Ruger mags

[-]

second_ary@reddit

the painful thing is that the adapters are very clearly 3d printed but the nobody has any files for it. i need to get it but paying 8 bucks for a 3d printed part when I own a printer is against my religion.

[-]

ScopedShotgun@reddit

I absolutely love my lightnin grip I purchased from them a year ago for my tx22. It’s too easy to burn through a brick of .22 at the range now. No issues with it whatsoever, and my tx22 remains just as reliable. I also have the adaptor for my ruger sr22 and it works but is a little more finicky with loading. No reliability issues with the sr22 though.

I wish they made one for the 10/22.

[-]

Thefolsom@reddit

Bought mine from McFadden. I have the tx22 adapter as well as an ar22 and 15-22 adapter. All of them work extremely well. The magazine adapters are brilliant and it's all around a great product. Can't recommend them enough.

[-]

Bufo_Stupefacio@reddit

I also bought from their official site (last year?) with no issue. Works great since there was a rebate for free mags when I bought my tx22 and I got in on a sale for the 6 pack of mags and range bag Taurus used to occasionally offer.

Very much the quickest and easiest way to reload them!

[-]

Jamieson22@reddit

I have a bunch of 22s and have the OPs Loader for my MKIVs and the Lightening Loader with attachments for my TX22s and S&W Victory. I kind of gave up on both of them and just use Hilljak quickie loaders. By the time I’d add a box, shake to align, feed each mag I didn’t think I was saving much time over using a Hilljak. Plus Hilljak is much smaller in range bag.

[-]

TC_19a@reddit

I bought mine direct from them. The site was absolute dog shit but I got my order no problem.

Grip + adapter for TX22.

[-]

BrambleVale3@reddit

I bought mine directly from McFadden and couldn’t be happier with it for my tx22. I find it works a lot better if you load one round in each mag before you start, but doing that has almost completely eliminated the fail to feed problems that my pistol had.

I’ve never seen them go on sale so just buy one and don’t hold out for a deal.

[-]

PewPew247365@reddit

https://www.mcfaden.com/McFadden-Machine-Lightnin-Grip-Loader-s/1828.htm

[-]

Hereforgundeals69420@reddit (OP)

This, or the baby maglula works too! The mcfadden lightning is freaking awesome though.

[-]

toxicity69@reddit

I'm a Maglula guy for the most part, but I can vouch for this speed loader being 100% hands-down the way to go with MK series pistols. Once you get the hang of how to hold the speed loader to get the rounds to slide into the mag (there's a little nuance to it, but it's not hard), you will blow through SO. MUCH. AMMO. Be warned.

It's really as easy as dumping a box of 50 rounds into the loader, shaking it a bit to get some to drop down into the feed channel, inserting a mag, and tipping the loader back while shaking it gently. Boom 2 seconds later the mag is full and you're onto the next one.

To anyone with a Mark series pistol: this is a game-changing, no-brainer purchase. 10 round mags don't suck as bad when you can load 5 up in less than a minute.

[-]

Measurex2@reddit

Agreed whole heartedly. I can start with a closed box of ammo and have four mags loaded in 30 seconds. It's phenomenal.

These take a few tries to get the screw adjusted but once there you're good to go.

Protip: 22lr ammo is waxy. After a few hundred rounds it can bind a little. If ammo isn't falling directly into the mag, give it a squirt of a plastic safe oil like remoil and you're good to go again.

[-]

toxicity69@reddit

Great point on the gumming up of the loader. I actually just had to clean mine out a bit for the first time last range trip after feeding at least 2k CCIs and Federal Automatch through it.

[-]

Measurex2@reddit

I literally just hit it with a spray of remoil and it's good to go. I put in hundreds of rounds because I don't really count and figured I'd be on the low side.

How do you clean yours? Soap and water?

[-]

TheCat0115@reddit

How are you all spraying the RemOil? Just directly into the loader?

[-]

Measurex2@reddit

Yep, dump the box of ammo, spritz them and then shake. It's like im using the rounds to spread it where it needs to go

[-]

TheCat0115@reddit

Thanks!

[-]

toxicity69@reddit

Lol...I was at the range reloading mags when I got sick of the rounds not sliding as freely, so I just took a new cleaning patch, wrapped it around a screwdriver, and went up and down the feed channel to de-gum it enough to resume range shenanigans. I made sure that I hit the spot where the rounds slide into the mag (at the spring-loaded ball bearing detent) as that seems to be whre the rounds like to get jammed up the most in my experience. That 30 second wipe-down was all it needed to work better, but I think your approach of actually removing the wax is a good idea once in a while.

[-]

Measurex2@reddit

your approach of actually removing the wax is a good idea once in a while.

Not sure if a squirt of oil does it or slowly adds to a build up but I have 4-5k through the thing and it is working!

[-]

TheCat0115@reddit

How are you spraying the RemOil? Just directly into the loader?

[-]

autisticlettuce@reddit

Okay, so I've been fiddling with mine for a couple weeks now. I've tried the Rem Lube trick, and it helps a bit, but I'm still having to tap/shake each round into the mag. I've seen videos where they just slide right into the mag, but I've never been able to get mine to do that. I've also noticed the interior surface is coated with a kinda sticky, grimy film - is that coming from the rounds?

Have tried adjusting both screws, and maybe I just haven't hit the sweet spot yet?

[-]

toxicity69@reddit

Yeah, the grime is probably coming from the wax coating present on most (all?) 22LR rounds (some are worse than others).

I usually have to tap to get the rounds to start flowing, and a few taps at the end help to get the last round seated fully, but that's probably because I have only ever done a single wipe down since buying it last year. It works well enough though, so I don't bother lol. Periodically claiming is probably a good idea as that gunk just adds sticky friction points.

[-]

j-birddy@reddit

Your review just got them a sale!

[-]

JJMcGee83@reddit

Seriously the best speed loader for any of the single stack 22 mags that this thing works with. It works extremely well. Some point it started jamming up on me and I followed their instructions to clean it and back to brand new.

[-]

Cicaduhhh@reddit

Anyone know if these would work with Taurus .22 mags?

[-]

Spectrumpigg@reddit

I have this and the adapter. It works flawlessly. Be forewarned. You will burn through a lot of ammo because of this loader.

[-]

PewPew247365@reddit

This doesn’t but McFadden has a grip loader that is tx22 adapter compatible.

[-]

Cicaduhhh@reddit

I was just looking at that last night for my 10/22 cuz I haven't decided on a speed loader for that either. Might pick it up with adapters so I can do my 10/22 and tx22. Thanks for the link

[-]

Thefolsom@reddit

Afaik McFadden only works for certain off brand 10/22 mags. I have the speedbeez loader for 10/22 and it's good for all oem mags.

[-]

lowlyauditor@reddit

Be warned, from everything I’ve read they don’t work with Ruger brand mags. Maybe someone will chime in but that’s the only reason I haven’t grabbed one yet (will probably pick one up for my tx22 soon anyway)

[-]

toxicity69@reddit

That's my understanding as well. It works for some of the aftermarket magazines, but not Ruger brand, which makes it a no-go for me as I exclusively run Ruger BX series (for better or worse when it comes to BX-25s lol). I use the Maglula for my 10/22, and it works fine, but the things I'd do for a McFadden-style speed loader for my 10/22...ugh.

[-]

lowlyauditor@reddit

Ya I’ve been eyeing the speed beez to load my 10 round rotary mags, but I’m just skeptical of how much faster it’d actually be and don’t love the idea of having an extra loader around. Having one that could do them all with a quick adapter change would be ideal.

[-]

Coke_Can3@reddit

I use this with my TX22. Burned through 700 rounds in an hour without even trying. Takes me 45 seconds to fully load (4) 22 round mags and a 16 rounder. Buy mote of the magazine adapters since they do wear out after awhile.

[-]

echocharlie86@reddit

Any advice on how to tune these? I've been using mine for several years now, and agree with everyone else. If you own a gun that is compatible with these, then it is a mandatory buy. However, I have issues getting the 8th-10th rounds to load. They'll all slide freely into the mag, but then I have to kind of pump the loader up and down to get the rest of the rounds in. Despite the manual saying to avoid, pumping these to get the last rounds in.

[-]

Hereforgundeals69420@reddit (OP)

I've read a lot of people having similar issues resolved by spraying a bit of oil along the cartridge path. Some 22 rounds leave wax residue that can cause this to clog a bit and the oil loosens it back up.

[-]

duke_flewk@reddit

$17.76 shipped 🫡

Thanks gundeals69420

[-]

Hereforgundeals69420@reddit (OP)

All in a day's work Duke, cheers!

[-]

gravehunterzero@reddit

I am waiting for the Ruger SSH to come back in stock in Silencer Shop, but I already have everything for it, including this. I have a Holosun 507C ACSS, Lobos mount, and a supressor. Now I just need the gun.

[-]

kpag1@reddit

It’s in stock right now if you’re cool with FDE…

[-]

gravehunterzero@reddit

I'm not. that's the only color I didn't want. Baur precision has a black one, but I read they had shit CS.

[-]

Hereforgundeals69420@reddit (OP)

Build your own! Find a cheap MKIV and you can buy pre-chopped uppers for less than the SSH. I am putting my "SSH at home" together for about $430 and wasn't charged sales tax unlike SS which does collect tax.

[-]

gravehunterzero@reddit

Would the lobos SSH mount work for that?

[-]

Hereforgundeals69420@reddit (OP)

Not sure about that, sorry. The SSH may have different screw patterns if there is a separate version for them. I have a standard Lobos DDP that dropped on fine since regular/target/tactical MKIV's all have the same thread patterns (the lite may also be different, but these are not lite base uppers)

[-]

2Drogdar2Furious@reddit

Says it works with Buckmark? I'm in!

[-]

RugerRedhawk@reddit

I too am a buckmark guy, gonna snag one of these

[-]

_Dexma_@reddit

I have 3 of the Lightning Loaders (1 for subs, 1 for cheapo, 1 for HV) but didn't know these existed. Thanks for the deal!

[-]

CaptainMagma1@reddit

Snagged one, $17.52 shipped to AZ w/Welcometk10 code

Had to checkout as guest, code only works for “first” purchase

[-]

Maxisagnk@reddit

mandatory buy for mk series owners. amazing gadget

[-]

9IX@reddit

Damn, this version doesn’t work with the Umarex MP5 .22LR…

[-]

_jB_@reddit

I think I’ll love my Mark IV even more now. Thanks OP

[-]

Winner_Pristine@reddit

Ordered. I never knew that existed but that looks awesome. For that price it's a no brainer.

[-]

Hereforgundeals69420@reddit (OP)

I've never used this, but their Lightning loader is absolutely spectacular. I can fully load CMMG 22 ARC mags in like 5 seconds. Excited to try this one out and the wild $10 off coupon definitely doesn't hurt.

[-]

Sasselhoff@reddit

These are dang near a "must have" for anyone who shoots MKIVs. I can't believe I went so long without one...worth every damn penny.

[-]

bassackwardslefty@reddit

Ehh...I've done fine with this guy I printed which is similar.

This pushy boi stays in my range bag and does pretty well in a pinch as well.

[-]

NautilusShell@reddit

This thing fucks, good deal, OP. I love mine.

[-]

KT_Bites@reddit

Got one by Speed Beez and works great unless the ammo (Aguila) is coated in wax. Gums up and doesn't flow properly into mag

[-]

fisher_man_matt@reddit

Thanks for posting. I was needing another one of these. Great price.

[-]

PewPew247365@reddit

Huh. I’ve had this on my list to buy for a year or so now.

Purchased. Thanks.

[-]

Domain Insights:

tandemkross.com
Registered	January 04, 2012
Times posted	12
Feedback rating	None

^(I am a bot, and this action was performed automatically. Please) ^(contact the moderators of this subreddit) ^(if you have any questions or concerns.)

[-]

AutoModerator@reddit

Thanks for posting /u/Hereforgundeals69420!

/r/GunDeals has updated the website blacklist, check it out before making your next purchase!.

Made a gun related purchase recently? Leave a review over at /r/GunDealsFU to let others know how it went!

Are you a dealer? Make sure to read the and apply for a dealer flair as soon as possible!

First time to /r/GunDeals? Read up on the user rules before you break a rule!

Have a question that isn't answered in our wiki? Send the /r/GunDeals modteam a message!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.