[NFA]SAW Tisha 5.56/6mm, Inconel, $1139 and free ship w/code THANKS
Posted by Hansohn_Brothers@reddit | gundeals | View on Reddit | 67 comments
Back in stock, ready to form 3, 4 or 5.
Bubbly-Celery-4096@reddit
Is it really low back pressure? Like hux?
Okiekid1870@reddit
Yes. Can’t tell a difference vs my Flow 556k on an AR, AK, or X95.
Unprofessional6997@reddit
I've never shot a hux, but my eyes are very gas sensitive. I have a Ti tisha that requires no additional tuning from unsuppressed. Highly recommend.
v8_slayer@reddit
I’m so confused because my Tisha is way gassier than my alleycat. It gasses me out in a few shots. Love the sound but I can’t stand shooting with it
Okiekid1870@reddit
Ain’t no way man.
I shot my Tisha back to back against my Flow 556k on multiple hosts and I couldn’t discern any difference in gas.
Ejection angle was the same too.
Aware_Donkey_6074@reddit
Watch out the hive mind will cancel you for using real world experience 🤡🫣
v8_slayer@reddit
lol I know it happens every time. Could be a guy who’s never even held one telling me I’m wrong and lying to make them look bad.
Aware_Donkey_6074@reddit
These are the same people that if they walked in to Micah banging their wife they’d be jealous they also didn’t get to bang Micah.
RNAguns@reddit
I actually quite dislike Micah. Total bitch move to completely distance himself from GT just because the guy likes to bang girls rotten 😂
Next_Entertainer_404@reddit
And this is why people don’t take the gun community seriously. Half the men pretend to be the ultimate macho, devoted dad, Christlike figure of their community and then actually think like this or behave like GT.
TheCrimsonChin-ger@reddit
Now that's a hot take lol. Missing a bit of nuance with the (alleged) situation. If I had a friend with a family who his whole shtick was dad advice, and he proceeds to be a serial adulterer, you best believe I'd distance myself too.
Next_Entertainer_404@reddit
What are you shooting it on? You could just have an incredibly overgassed gun.
v8_slayer@reddit
DD Ris iii 11.5 I bought a brt gas tube so when I get back to the rifle, gonna install that and see if it helps.
redacted_robot@reddit
Before putting my tisha on my mk18 I had a hux MD on it to run my 762 and 556k flows. Also used a hux hub conversion to run my WB718 and polos.
IME the tisha is only gassier than hux. It is a remarkable can on the mk18. Haven't shot it on anything else.
FitzroysBeagle@reddit
That’s surprising to hear. I believe the ODB is supposed to have less backpressure than the alleycat, and my inconel Tisha has noticeably less back pressure than the ODB.
https://docs.google.com/spreadsheets/d/1q5-MiIW9y4zAG4WNV-ag3slRD6pHTreQf5RfponL9XY/edit?usp=drivesdk
reservedtortoise@reddit
We need juiceymedia to do a comparison with that ground up shit backlit by the sun. Reference gun and ammo, CAT vs SAW vs HUX.
Unprofessional6997@reddit
Idk. The only 2 "reduced backpressure" cans I can compare it to are my LPM Torch and my brother's WB. It is quieter and lower back pressure than both of those cans.
Bubbly-Celery-4096@reddit
This will be amazing for my shorties. So tempted but been buying too much recently. I need to recharge first lol
rrrice3@reddit
Lol same. I decided cans are likely the first thing a shift in administration will target... Lost tax opportunity plus they are scary? Buy now!
Foxxy__Cleopatra@reddit
It's very low backpressure. Not like Hux that's like virtually zero backpressure, but considerably less than like a CAT WB that's already a low backpressure can.
Aware_Donkey_6074@reddit
I’m waiting for a similar can from a better company.
Ordinary-Machine1451@reddit
Truly curious. We all know about the blemish debacle and their handling of it. What could SAW do as a new company adapting to their growing and internet-hype pains that would make you say, “This company is good to go,”?
Background_Event_612@reddit
For one, stop making blems. Someone was selling some within the week still. It really makes it hard to trust that they actually know what they’re doing if they are still putting out blemished products. Additive manufacturing isn’t some brand new magic special process anymore.
Next_Entertainer_404@reddit
So it’s not even SAW selling them, it’s vendors lmao. Yall are grabbing at straws here.
Background_Event_612@reddit
Lol you think the dealers are making the blems? Absolute braindead response. Company continues to make blems and you’ll keep defending, swing harder on those nuts.
Next_Entertainer_404@reddit
You think they didn’t buy them way back when they were made? You think they’re still just sending those out?
Background_Event_612@reddit
Lmao who’s grasping at straws now?
Deeper__Thought@reddit
Give a tour of their quality department, showing that they know what equipment is necessary to qualify additive components for service and that they arent just pressing print and shipping whatever comes off the plate
Next_Entertainer_404@reddit
Lol, no. Name a single company that’s done that
Bortjort@reddit
two guys sitting at a card table or something is my guess (I still bought one)
Next_Entertainer_404@reddit
Here comes the bandwagon hate from someone who probably wouldn’t pay that much for a can anyway so they just shit on a company for no reason.
Aware_Donkey_6074@reddit
I got over 20k worth of cans ranging from ($400-$1300’s). I’d rather buy from a company that understands how printing works. Whoever steps up to compete with this can will most likely make a better one. Competition creates innovation.
Cool_Aioli_6910@reddit
Unfortunately r/nfa has spilled to other subs. Men who spend a lot of money on cans that leads them to be overly emotionally invested in the brands.
Next_Entertainer_404@reddit
Yet there’s just as many of you shitting on a product you only know about because of one minor issue. You out here screaming about p320s too?
Aware_Donkey_6074@reddit
P320’s are also trash.
Next_Entertainer_404@reddit
You on every post about one saying that?
Aware_Donkey_6074@reddit
Looks like we found Micah’s burner account 💃🏽
Next_Entertainer_404@reddit
You’ve never made a single mistake? Their old machines didn’t require heat treating, so they mistakenly assumed their new ones wouldn’t either. Hence the cracking. They fixed it, they heat treat them now with their new machines, AND they gave all the users with issues brand new cans.
What the fuck else do you want? Their firstborn son? If you’re just here to be a negative Nancy then go away lol.
otherballs@reddit
Why are you responding to this so personally?
I don't understand why someone would want to buy a suppressor from a company that released a product with a major defect like this when there are plenty of companies that haven't had a major quality event.
A suppressor is a hollow tube that cost $1000+ dollars. It's not like they're making something complicated like a rocket or computer chip.
The price point justifies a reliable product on the first go around. If a bad one slips out ever now and then, there's no way to avoid that. If an entire product line is flawed, the company has poor judgement and should go out of business. Like a bunch of other people have pointed out, it suggests that they aren't doing QC on the entire line.
Also, chasing sound performance over reliability is a fools errand. It's like buying a Land Rover instead of a Toyota. People do it. But those people are, well, they don't have the best judgement. Or they are ok with throwing the money away.
Next_Entertainer_404@reddit
You sound just as invested in negatively attacking a company that you don’t own a product for. So who’s really taking it personally?
If you don’t own it, then quit yapping about it lol.
batlesnake@reddit
Aah so you have to own something to talk about it. 🤓 thank you.
Next_Entertainer_404@reddit
It’s the same thing as the people saying Porsche gt3rs’s aren’t this or aren’t that. You don’t have one and can’t afford it anyways, so why are you talking negatively about it lol.
batlesnake@reddit
Exactly your point. People see reviews and certain quality issues and know more about something they probably dont own. Who cares.
Next_Entertainer_404@reddit
What reviews have you seen outside of the first bad batch that was already addressed? Unlike Sig’s refusal to address their issues.
batlesnake@reddit
🤓I dont own one so I couldnt say 🤷🏿♂️
otherballs@reddit
fucking lol
Vintar@reddit
Saying a suppressor is just a hollow tube is like saying a computer is just a metal box.
Suppressor technology is becoming so good because people are sciencing the shit out of dynamic gas flow instead of just eyeballing it with baffle stacks. And people like Pewscience are analyzing those complex gas flows to give us data that pushes innovation forward.
Good QC shouldn't be neglected, but you can't innovate as fast as the suppressor industry has been and expect no problems from anyone anywhere. Things have been moving so fast that some reviewers say Huxwrx cans are already old technology
otherballs@reddit
It takes 10s of thousands of engineers, 10+ large companies and 50+ medium size companies to make a single computer. One person with a CNC can make a suppressor. Some of the newer cans increase the complexity to the point where you need a small company and an expensive 3d printer. But it's still multiple orders of magnitude less complex than most of the individual components in a computer.
Vorpalis@reddit
"I don't understand why someone would want to buy a suppressor from a company that released a product with a major defect like this..."
Personally, how they responded to their mistake matters a lot more to me than the mistake itself, for a couple of reasons:
Accountability is honorable and it takes actual strength. Fucking up is embarrassing, and pushing through that discomfort to stand there hat in hand, acknowledge your fuck up and apologize for it takes strength of character that too few possess anymore.
It's not reasonable to expect someone to never make a mistake, and when I do fuck up, I choose to behave how I would want to be treated, because otherwise, if we shit on people for fucking up, hold on to our anger and refuse to forgive them after they've apologized and tried to make it right, then people have no incentive to be accountable, so instead people will lie and distract and blame others to cover up their mistakes, and fuck that.
"A suppressor is a hollow tube that cost $1000+ dollars. It's not like they're making something complicated like a rocket or computer chip."
No, not that complicated, but speaking as an engineer, it's a lot more complicated and difficult to get right than people who've never made one realize. Every job seems easy when you've never done it.
batlesnake@reddit
Who buys a new machine and doesn't QC the first batch they produce. Then sees the cracks and sells as a blem
Next_Entertainer_404@reddit
Again, never said they were perfect. But what more do you want from them? They can’t go back in time and everything they’ve done since has been spot on.
So quit bitching since you’re never gonna buy one anyways. I’m tired of all the whiners here complaining about something they’ll never choose to own.
Hansohn_Brothers@reddit (OP)
Can you elaborate? Sure, they had some issues, but were very transparent and made good in end.
Sal-LeMandeur@reddit
Man the hype pricing is nutty. These are cheaper to make than the Ti, and short as they are they can run them double-stacked on a build plate. Cost to fully make and process these is gonna be somewhere around $200-$250. Not saying they should sell at cost, but goddamn.
Aware_Donkey_6074@reddit
Uneducated consumers are the best consumers.
Bortjort@reddit
Nice-Quarter-9237@reddit
I have a shiv suppressor and I really like it
Bortjort@reddit
mines in jail right now I can't wait. I weighed the tanker brake on my AKV last night and it was 5 oz, I can't comprehend how an effective suppressor weighs half that
Alarmed_Reflection86@reddit
I shot a few of these at an event a few weeks ago. They are stupid quiet. Thoroughly impressed.
medicalboa@reddit
Any possibility of seeing the dd wolf hunter come back soon? Any recommendations for a 22 creed can?
Hansohn_Brothers@reddit (OP)
Absolutely, just waiting on our order to be ready and shipped from DD. One of my favoritist cans. 😃
Demfer@reddit
Does this ship to home?
Hansohn_Brothers@reddit (OP)
For Virginia residents, we can do that. There is a $40 fee however.
Demfer@reddit
I’m in NH
Hansohn_Brothers@reddit (OP)
Your dealer can, if they are willing.
Hansohn_Brothers@reddit (OP)
Here's a nice overview done by Suppressed Nation.
https://youtu.be/Ca61_OkENvA?si=-MRpglcwzz6BSRXL
jcpcj@reddit
THANKS
AutoModerator@reddit
Thanks for posting /u/Hansohn_Brothers!
/r/GunDeals has updated the website blacklist, check it out before making your next purchase!.
Made a gun related purchase recently? Leave a review over at /r/GunDealsFU to let others know how it went!
Are you a dealer? Make sure to read the and apply for a dealer flair as soon as possible!
First time to /r/GunDeals? Read up on the user rules before you break a rule!
Have a question that isn't answered in our wiki? Send the /r/GunDeals modteam a message!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.